Pro/E Mapkeys
RM Engineering Home
This is a list of Pro/E mapkeys, to try them out paste this into your config.pro file. After playing with them you may get some ideas of making your own colleciton.
mapkey $F1 @MAPKEY_LABELShade;~ Select `main_dlg_cur`
`MenuBar1`1 `View`;\
mapkey(continued) ~ Select `main_dlg_cur` `View.cb_view_advanced`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Close `main_dlg_cur` `View.cb_view_advanced`;\
mapkey(continued) ~ Activate `main_dlg_cur` `psh_view_mdldisp`;\
mapkey(continued) ~ Select `modeldisplay` `ModDsply_Tab`1 `ModDsply_Layout_Shade`;\
mapkey(continued) ~ Update `modeldisplay` `ModDsply_SB_ShadeQlty`4 ;\
mapkey(continued) ~ Update `modeldisplay` `ModDsply_SB_ShadeQlty`5 ;\
mapkey(continued) ~ Update `modeldisplay` `ModDsply_SB_ShadeQlty`6 ;\
mapkey(continued) ~ Update `modeldisplay` `ModDsply_SB_ShadeQlty`7 ;\
mapkey(continued) ~ Update `modeldisplay` `ModDsply_SB_ShadeQlty`8 ;\
mapkey(continued) ~ Update `modeldisplay` `ModDsply_SB_ShadeQlty`9 ;\
mapkey(continued) ~ Update `modeldisplay` `ModDsply_SB_ShadeQlty`10 ;\
mapkey(continued) ~ Activate `modeldisplay` `ModDsply_PB_Apply`;\
mapkey(continued) ~ Activate `modeldisplay` `ModDsply_PB_OK`;
mapkey es @MAPKEY_LABELedit sketch;\
mapkey(continued) ~ Activate `main_dlg_cur` `chkbn.extrev_1_placement.0`1 ;\
mapkey(continued) ~ Activate `extrev_1_placement.0.0` `PH.Sketch`;\
mapkey(continued) ~ Activate `Odui_Dlg_01` `stdbtn_3`;\
mapkey(continued) ~ Select `main_dlg_cur` `ProCmdEnvMdlDisp.mdisp`1 `No
hidden`;\
mapkey(continued) ~ Activate `GET SELECT` `quit_sel`;
mapkey pp @MAPKEY_LABELcreate protrusion;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdFtExtrude.a_feat`;\
mapkey(continued) ~ Activate `main_dlg_cur` `chkbn.extrev_1_placement.0`1 ;\
mapkey(continued) ~ Activate `extrev_1_placement.0.0` `PH.Sketch`;\
mapkey(continued) ~ Activate `Odui_Dlg_01` `stdbtn_1`;~ Activate `references`
`Close`;\
mapkey(continued) ~ Select `main_dlg_cur` `ProCmdEnvMdlDisp.mdisp`1 `No hidden`;
mapkey ln @MAPKEY_NAMELaunch Notepad;@MAPKEY_LABELnotepad;\
mapkey(continued) @SYSTEMc:\\\%username\%\\prodata\\notepad.bat;
mapkey le @MAPKEY_NAMELaunch Excel;@MAPKEY_LABELexcel;\
mapkey(continued) @SYSTEMc:\\\%username\%\\prodata\\excel.bat;
mapkey lc @MAPKEY_LABELCalculator;@SYSTEMc:\\\%username\%\\prodata\\calc.bat;
mapkey lt @MAPKEY_NAMELaunch CETOL;@MAPKEY_LABELCETOL;\
mapkey(continued) @SYSTEMc:\\\%username\%\\prodata\\cetol.bat;
mapkey lo @MAPKEY_NAMELaunch Outllok;@MAPKEY_LABELOutlook;\
mapkey(continued) @SYSTEMc:\\\%username\%\\prodata\\outlook.bat;
mapkey dd #environment;#disp dtmpln;#done-return
mapkey da #environment;#disp axes;#done-return
mapkey dc #environment;#disp csys;#done-return
mapkey dp #environment;#disp points;#done-return
mapkey vf ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\
mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `FRONT`;
mapkey vb ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\
mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `BACK`;
mapkey vt ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\
mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `TOP`;
mapkey vr ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\
mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `RIGHT`;
mapkey vl ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\
mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `LEFT`;
mapkey vu ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\
mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `BOTTOM`;
mapkey vv ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\
mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `Default`;
mapkey hy @MAPKEY_LABELhighlight YES;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Edit`;\
mapkey(continued) ~ Select `main_dlg_cur` `Edit.cbSelect`;~ Close `main_dlg_cur`
`MenuBar1`;\
mapkey(continued) ~ Close `main_dlg_cur` `Edit.cbSelect`;\
mapkey(continued) ~ Activate `main_dlg_cur` `psh_sel_filter`;\
mapkey(continued) ~ Activate `selprefs` `PrehButton`1 ;~ Activate `selprefs`
`Ok`;
mapkey hn @MAPKEY_LABELhighlite NO;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Edit`;\
mapkey(continued) ~ Select `main_dlg_cur` `Edit.cbSelect`;~ Close `main_dlg_cur`
`MenuBar1`;\
mapkey(continued) ~ Close `main_dlg_cur` `Edit.cbSelect`;\
mapkey(continued) ~ Activate `main_dlg_cur` `psh_sel_filter`;\
mapkey(continued) ~ Activate `selprefs` `PrehButton`0 ;~ Activate `selprefs`
`Ok`;
mapkey dd @MAPKEY_LABELdisplay datums;#environment;#disp dtmpln;\
mapkey(continued) #done-return
mapkey da @MAPKEY_LABELdisplay axes;#environment;#disp axes;#done-return
mapkey dc @MAPKEY_LABELdisplay csys;#environment;#disp csys;#done-return
mapkey dp @MAPKEY_LABELdisplay points;#environment;#disp points;\
mapkey(continued) #done-return
mapkey vf @MAPKEY_LABELview front;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\
mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `FRONT`;
mapkey vb @MAPKEY_LABELview back;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\
mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `BACK`;
mapkey vt @MAPKEY_LABELview top;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\
mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `TOP`;
mapkey vr @MAPKEY_LABELview right;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\
mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `RIGHT`;
mapkey vl @MAPKEY_LABELview left;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\
mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `LEFT`;
mapkey vu @MAPKEY_LABELview under (bottom);\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\
mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `BOTTOM`;
mapkey vd @MAPKEY_LABELview default;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\
mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `Default`;
mapkey ww @MAPKEY_LABELworkspace change;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Utilities`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `Utilities.psh_util_weblnk_server_registry`;
mapkey ms @MAPKEY_LABELmeasure surface distance;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Analysis`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `Analysis.psh_analysis_measure`;\
mapkey(continued) ~ Open `measure` `MsrTypeOptions`;~ Close `measure` `MsrTypeOptions`;\
mapkey(continued) ~ Select `measure` `MsrTypeOptions`1 `Distance`;\
mapkey(continued) ~ Open `measure` `DistProjRefOptions`;~ Close `measure` `DistProjRefOptions`;\
mapkey(continued) ~ Select `measure` `DistProjRefOptions`1 `Csys`;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdMdlTreeSearch.edit_t`;\
mapkey(continued) ~ Open `selspecdlg0` `SelOptionRadio`;~ Close `selspecdlg0` `SelOptionRadio`;\
mapkey(continued) ~ Select `selspecdlg0` `SelOptionRadio`1 `Coord Sys`;\
mapkey(continued) ~ Open `selspecdlg0` `LookByOptionMenu`;\
mapkey(continued) ~ Close `selspecdlg0` `LookByOptionMenu`;\
mapkey(continued) ~ Select `selspecdlg0` `LookByOptionMenu`1 `Coord Sys`;\
mapkey(continued) ~ Activate `selspecdlg0` `EvaluateBtn`;~ Activate
`selspecdlg0` `ApplyBtn`;\
mapkey(continued) ~ Activate `selspecdlg0` `CancelButton`;#CARTESIAN;\
mapkey(continued) ~ Open `measure` `DistFromOptions`;~ Close `measure` `DistFromOptions`;\
mapkey(continued) ~ Select `measure` `DistFromOptions`1 `Plane`;\
mapkey(continued) ~ Open `measure` `DistToOptions`;~ Close `measure` `DistToOptions`;\
mapkey(continued) ~ Select `measure` `DistToOptions`1 `Plane`;
mapkey mp @MAPKEY_LABELmeasure points distance;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Analysis`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `Analysis.psh_analysis_measure`;\
mapkey(continued) ~ Open `measure` `DistProjRefOptions`;~ Close `measure` `DistProjRefOptions`;\
mapkey(continued) ~ Select `measure` `DistProjRefOptions`1 `Csys`;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdMdlTreeSearch.edit_t`;\
mapkey(continued) ~ Activate `selspecdlg0` `EvaluateBtn`;~ Activate
`selspecdlg0` `ApplyBtn`;\
mapkey(continued) ~ Activate `selspecdlg0` `CancelButton`;~ Open `measure` `DistFromOptions`;\
mapkey(continued) ~ Close `measure` `DistFromOptions`;\
mapkey(continued) ~ Select `measure` `DistFromOptions`1 `Point`;\
mapkey(continued) ~ Open `measure` `DistToOptions`;~ Close `measure` `DistToOptions`;\
mapkey(continued) ~ Select `measure` `DistToOptions`1 `Point`;
mapkey mp @MAPKEY_LABELmeasure points distance;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Analysis`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `Analysis.psh_analysis_measure`;\
mapkey(continued) ~ Open `measure` `MsrTypeOptions`;~ Close `measure` `MsrTypeOptions`;\
mapkey(continued) ~ Select `measure` `MsrTypeOptions`1 `Distance`;\
mapkey(continued) ~ Open `measure` `DistProjRefOptions`;~ Close `measure` `DistProjRefOptions`;\
mapkey(continued) ~ Select `measure` `DistProjRefOptions`1 `Csys`;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdMdlTreeSearch.edit_t`;\
mapkey(continued) ~ Activate `selspecdlg0` `EvaluateBtn`;~ Activate
`selspecdlg0` `ApplyBtn`;\
mapkey(continued) ~ Activate `selspecdlg0` `CancelButton`;#CARTESIAN;\
mapkey(continued) ~ Open `measure` `DistToOptions`;~ Close `measure` `DistToOptions`;\
mapkey(continued) ~ Select `measure` `DistToOptions`1 `Point`;\
mapkey(continued) ~ Open `measure` `DistFromOptions`;~ Close `measure` `DistFromOptions`;\
mapkey(continued) ~ Select `measure` `DistFromOptions`1 `Point`;
mapkey ms @MAPKEY_LABELmeasure surface distance;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Analysis`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `Analysis.psh_analysis_measure`;\
mapkey(continued) ~ Open `measure` `MsrTypeOptions`;~ Close `measure` `MsrTypeOptions`;\
mapkey(continued) ~ Select `measure` `MsrTypeOptions`1 `Distance`;\
mapkey(continued) ~ Open `measure` `DistProjRefOptions`;~ Close `measure` `DistProjRefOptions`;\
mapkey(continued) ~ Select `measure` `DistProjRefOptions`1 `Csys`;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdMdlTreeSearch.edit_t`;\
mapkey(continued) ~ Activate `selspecdlg0` `EvaluateBtn`;~ Activate
`selspecdlg0` `ApplyBtn`;\
mapkey(continued) ~ Activate `selspecdlg0` `CancelButton`;#CARTESIAN;\
mapkey(continued) ~ Open `measure` `DistToOptions`;~ Close `measure` `DistToOptions`;\
mapkey(continued) ~ Select `measure` `DistToOptions`1 `Plane`;\
mapkey(continued) ~ Open `measure` `DistFromOptions`;~ Close `measure` `DistFromOptions`;\
mapkey(continued) ~ Select `measure` `DistFromOptions`1 `Plane`;
mapkey ss @MAPKEY_LABELsave;~ Activate `main_dlg_cur` `ProCmdModelSave.file`;\
mapkey(continued) ~ Activate `file_saveas` `OK`;
mapkey sc @MAPKEY_LABELsave & checkin;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `File`;\
mapkey(continued) ~ Select `main_dlg_cur` `File.CheckinCascade_fp`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Close `main_dlg_cur` `File.CheckinCascade_fp`;\
mapkey(continued) ~ Activate `main_dlg_cur` `ExpressPb_fp`;~ Activate `file_saveas`
`OK`;
mapkey zz @MAPKEY_LABELzoom in;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewZoomIn.view`;
mapkey za @MAPKEY_LABELzoom all;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewRefit.view`;;
mapkey zx @MAPKEY_LABELzoom out;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewZoomOut.view`;
mapkey dx @MAPKEY_LABELdim;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdDwgCrStdNewRefDim.dwg`;
mapkey pr @MAPKEY_LABELprint;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdModelPrint.file`;
mapkey dr @MAPKEY_LABELdimension ref;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdDwgCrRefStdNRDim.dwg`;
mapkey de @MAPKEY_LABELdelete;\
mapkey(continued) ~ Timer `UI Desktop` `UI Desktop` `popupMenuRMBTimerCB`;\
mapkey(continued) ~ Close `rmb_popup` `PopupMenu`;\
mapkey(continued) ~ Timer `UI Desktop` `UI Desktop` `popupMenuRMBTimerCB`;\
mapkey(continued) ~ Close `rmb_popup` `PopupMenu`;~ Activate `rmb_popup` `DwgPopupEditDelete`;
mapkey nn @MAPKEY_LABELnote;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdDwgCreateNote.help`;
mapkey fn @MAPKEY_LABELfree note;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdDwgCreateNote.dwg`;#MAKE
NOTE;#DONE;
mapkey pb @MAPKEY_LABELprint B;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdModelPrint.file`;\
mapkey(continued) ~ Activate `print` `Configure`;~ Open `print_config` `o_size`;\
mapkey(continued) ~ Close `print_config` `o_size`;~ Select `print_config`
`o_size`1 `B`;\
mapkey(continued) ~ Activate `print_config` `OK`;~ Activate `print` `OK`;\
mapkey(continued) ~ Activate `main_dlg_cur` `main_dlg_cur`;\
mapkey(continued) ~ Resize `main_dlg_cur` `main_dlg_cur`4 0.000000 0.000000
32.928292 \
mapkey(continued) 25.700130 ;~ Move `main_dlg_cur` `main_dlg_cur`2 0.000000
0.000000;
mapkey vd @MAPKEY_LABELview detail;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Insert`;\
mapkey(continued) ~ Select `main_dlg_cur` `Insert.cb_dwg_sym`;\
mapkey(continued) ~ Close `main_dlg_cur` `Insert.cb_dwg_sym`;\
mapkey(continued) ~ Select `main_dlg_cur` `Insert.cb_dwg_view`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Close `main_dlg_cur` `Insert.cb_dwg_view`;\
mapkey(continued) ~ Activate `main_dlg_cur` `psh_dwg_view_det`;
mapkey va @MAPKEY_LABELview aux;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Insert`;\
mapkey(continued) ~ Select `main_dlg_cur` `Insert.cb_dwg_view`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Close `main_dlg_cur` `Insert.cb_dwg_view`;\
mapkey(continued) ~ Activate `main_dlg_cur` `psh_dwg_view_aux`;
mapkey vg @MAPKEY_LABELview general;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Insert`;\
mapkey(continued) ~ Select `main_dlg_cur` `Insert.cb_dwg_view`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Close `main_dlg_cur` `Insert.cb_dwg_view`;\
mapkey(continued) ~ Activate `main_dlg_cur` `psh_dwg_view_gen`;
mapkey vp @MAPKEY_LABELview projection;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Insert`;\
mapkey(continued) ~ Select `main_dlg_cur` `Insert.cb_dwg_view`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Close `main_dlg_cur` `Insert.cb_dwg_view`;\
mapkey(continued) ~ Activate `main_dlg_cur` `psh_dwg_view_proj`;
mapkey rm @MAPKEY_LABELregen model;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Edit`;\
mapkey(continued) ~ Select `main_dlg_cur` `Edit.cb_dwg_regen`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;~ Close `main_dlg_cur` `Edit.cb_dwg_regen`;\
mapkey(continued) ~ Activate `main_dlg_cur` `psh_dwg_regen_model`;
mapkey rv @MAPKEY_LABELregen draft;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Edit`;\
mapkey(continued) ~ Select `main_dlg_cur` `Edit.cb_dwg_regen`;\
mapkey(continued) ~ Close `main_dlg_cur` `Edit.cb_dwg_regen`;~ Close `main_dlg_cur`
`MenuBar1`;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Edit`;\
mapkey(continued) ~ Select `main_dlg_cur` `Edit.cb_dwg_regen`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;~ Close `main_dlg_cur` `Edit.cb_dwg_regen`;\
mapkey(continued) ~ Activate `main_dlg_cur` `psh_dwg_regen_draft`;
mapkey rf @MAPKEY_LABELre fit;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewRefit.view`;
mapkey bb @MAPKEY_LABELbreak;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdDwgDtlBreak.dwg`;
mapkey sd @MAPKEY_LABELshow dim;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdDwgShowErase.dwg`;
mapkey pa @MAPKEY_LABELprint a;~ Select `main_dlg_cur` `MenuBar1`1 `File`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;~ Activate `main_dlg_cur` `File.psh_print`;\
mapkey(continued) ~ Activate `print` `Configure`;~ Open `print_config` `o_size`;\
mapkey(continued) ~ Close `print_config` `o_size`;~ Select `print_config`
`o_size`1 `A`;\
mapkey(continued) ~ Activate `print_config` `OK`;~ Activate `print` `OK`;\
mapkey(continued) ~ Activate `main_dlg_cur` `main_dlg_cur`;
mapkey li @MAPKEY_LABELinternet;@SYSTEMc:\nate_temp\internet.bat;
mapkey vv @MAPKEY_LABELview default;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\
mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `Default`;
mapkey dx @MAPKEY_LABELdim create;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdDwgCrStdNewRefDim.dwg`;
mapkey bb @MAPKEY_LABELbreak dimension;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdDwgDtlBreak.dwg`;
mapkey $F1 @MAPKEY_LABELShade quality;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `View`;\
mapkey(continued) ~ Select `main_dlg_cur` `View.cb_view_advanced`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Close `main_dlg_cur` `View.cb_view_advanced`;\
mapkey(continued) ~ Activate `main_dlg_cur` `psh_view_mdldisp`;\
mapkey(continued) ~ Select `modeldisplay` `ModDsply_Tab`1 `ModDsply_Layout_Shade`;\
mapkey(continued) ~ Update `modeldisplay` `ModDsply_SB_ShadeQlty`4 ;\
mapkey(continued) ~ Update `modeldisplay` `ModDsply_SB_ShadeQlty`5 ;\
mapkey(continued) ~ Update `modeldisplay` `ModDsply_SB_ShadeQlty`6 ;\
mapkey(continued) ~ Update `modeldisplay` `ModDsply_SB_ShadeQlty`7 ;\
mapkey(continued) ~ Update `modeldisplay` `ModDsply_SB_ShadeQlty`8 ;\
mapkey(continued) ~ Update `modeldisplay` `ModDsply_SB_ShadeQlty`9 ;\
mapkey(continued) ~ Update `modeldisplay` `ModDsply_SB_ShadeQlty`10 ;\
mapkey(continued) ~ Activate `modeldisplay` `ModDsply_PB_Apply`;\
mapkey(continued) ~ Activate `modeldisplay` `ModDsply_PB_OK`;
mapkey cc @MAPKEY_LABELcreate curve;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdDatumSketCurve.datum`;\
mapkey(continued) ~ Activate `Odui_Dlg_00` `stdbtn_1`;~ Activate `references`
`Close`;\
mapkey(continued) ~ Select `main_dlg_cur` `ProCmdEnvMdlDisp.mdisp`1 `No hidden`;
mapkey ln @MAPKEY_NAMELaunch Notepad;@MAPKEY_LABELnotepad launch;\
mapkey(continued) @SYSTEMc:\nate_temp\notepad.bat;
mapkey le @MAPKEY_NAMELaunch Excel;@MAPKEY_LABELexcel launch;\
mapkey(continued) @SYSTEMc:\\\%username\%\\prodata\\excel.bat;
mapkey lt @MAPKEY_NAMELaunch CETOL;@MAPKEY_LABELCETOL launch;\
mapkey(continued) @SYSTEMc:\\\%username\%\\prodata\\cetol.bat;
mapkey lo @MAPKEY_NAMELaunch Outllok;@MAPKEY_LABELOutlook launch;\
mapkey(continued) @SYSTEMc:\\\%username\%\\prodata\\outlook.bat;
mapkey nn @MAPKEY_LABELnote create;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdDwgCreateNote.help`;
mapkey li @MAPKEY_LABELinternet launch;\
mapkey(continued) @SYSTEMc:\\\%username\%\\prodata\\internet.bat;
mapkey am @MAPKEY_LABELadd model;~ Select `main_dlg_cur` `MenuBar1`1 `Edit`;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `File`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `File.psh_properties`;#DRAWING
MODELS;#ADD MODEL;
mapkey sm @MAPKEY_LABELset model;\
mapkey(continued) ~ Move `main_dlg_cur` `main_dlg_cur`2 -0.046706 1.307756 ;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `File`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `File.psh_properties`;#DRAWING
MODELS;#SET MODEL;
mapkey $F2 @MAPKEY_LABELhidden line;\
mapkey(continued) ~ Select `main_dlg_cur` `ProCmdEnvMdlDisp.mdisp`1 `Hidden
line`;
mapkey $F3 @MAPKEY_LABELWireframe;\
mapkey(continued) ~ Select `main_dlg_cur` `ProCmdEnvMdlDisp.mdisp`1 `No hidden`;
mapkey $F4 @MAPKEY_LABELshade;\
mapkey(continued) ~ Select `main_dlg_cur` `ProCmdEnvMdlDisp.mdisp`1 `Shading`;
mapkey $F5 @MAPKEY_LABELx-sections;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewVisTool.view`;\
mapkey(continued) ~ Select `visual_dlg0` `RadioSelApplMgr`1 `xsec`;
mapkey gg @MAPKEY_LABELregenerate;\
mapkey(continued) ~ Activate `main_dlg_cur` `Edit.pshRegenAuto`;
mapkey $F7 @MAPKEY_LABELdefault background;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `View`;\
mapkey(continued) ~ Select `main_dlg_cur` `View.cb_view_mdlsetup`;\
mapkey(continued) ~ Close `main_dlg_cur` `View.cb_view_mdlsetup`;\
mapkey(continued) ~ Select `main_dlg_cur` `View.cb_view_advanced`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Close `main_dlg_cur` `View.cb_view_advanced`;\
mapkey(continued) ~ Activate `main_dlg_cur` `psh_util_colors_sys`;\
mapkey(continued) ~ Select `color_scheme` `MenuBar2`1 `MenuScheme`;\
mapkey(continued) ~ Close `color_scheme` `MenuBar2`;~ Activate `color_scheme`
`Scheme1`;\
mapkey(continued) ~ Activate `color_scheme` `OK`;
mapkey $F9 @MAPKEY_LABELnight;~ Select `main_dlg_cur` `MenuBar1`1 `View`;\
mapkey(continued) ~ Select `main_dlg_cur` `View.cb_view_advanced`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Close `main_dlg_cur` `View.cb_view_advanced`;\
mapkey(continued) ~ Activate `main_dlg_cur` `psh_util_colors_sys`;\
mapkey(continued) ~ Activate `color_scheme` `BlendCB`0 ;~ Activate `color_scheme`
`OK`;
mapkey $F9 @MAPKEY_LABELnight;~ Select `main_dlg_cur` `MenuBar1`1 `View`;\
mapkey(continued) ~ Select `main_dlg_cur` `View.cb_view_advanced`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Close `main_dlg_cur` `View.cb_view_advanced`;\
mapkey(continued) ~ Activate `main_dlg_cur` `psh_util_colors_sys`;\
mapkey(continued) ~ Activate `color_scheme` `BlendCB`0 ;~ Activate `color_scheme`
`CColor0`1 ;\
mapkey(continued) ~ Activate `color_scheme` `CColor0`1 ;~ Activate `color_scheme`
`BColor0`;\
mapkey(continued) ~ Activate `pgl_color_editor` `StdOk`;~ Activate `color_scheme`
`CColor0`0 ;\
mapkey(continued) ~ Activate `color_scheme` `CColor0`1 ;~ Activate `color_scheme`
`OK`;
mapkey $F8 @MAPKEY_LABELwhite;~ Select `main_dlg_cur` `MenuBar1`1 `Edit`;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `View`;\
mapkey(continued) ~ Select `main_dlg_cur` `View.cb_view_advanced`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Close `main_dlg_cur` `View.cb_view_advanced`;\
mapkey(continued) ~ Activate `main_dlg_cur` `psh_util_colors_sys`;\
mapkey(continued) ~ Activate `color_scheme` `BlendCB`0 ;~ Activate `color_scheme`
`BColor0`;\
mapkey(continued) ~ Update `pgl_color_editor` `IRed` `255`;\
mapkey(continued) ~ FocusOut `pgl_color_editor` `IRed`;\
mapkey(continued) ~ Update `pgl_color_editor` `IGreen` `255`;\
mapkey(continued) ~ FocusOut `pgl_color_editor` `IGreen`;\
mapkey(continued) ~ Update `pgl_color_editor` `IBlue` `255`;\
mapkey(continued) ~ FocusOut `pgl_color_editor` `IBlue`;~ FocusOut `pgl_color_editor`
`IGreen`;\
mapkey(continued) ~ Activate `pgl_color_editor` `StdOk`;~ Activate `color_scheme`
`CColor0`0 ;\
mapkey(continued) ~ Activate `color_scheme` `CColor0`1 ;~ Activate `color_scheme`
`OK`;
mapkey $F6 @MAPKEY_LABELset color;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `View`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `View.push_view_appearances`;\
mapkey(continued) ~ FocusOut `pgl_appearance_editor` `AppearanceName`;
mapkey p0 #MODIFY;#NUM DIGITS;0;
mapkey p1 #MODIFY;#NUM DIGITS;1;
mapkey p2 #MODIFY;#NUM DIGITS;2;
mapkey p3 #MODIFY;#NUM DIGITS;3;
mapkey p4 #MODIFY;#NUM DIGITS;4;
mapkey p5 #MODIFY;#NUM DIGITS;5;
mapkey p6 #MODIFY;#NUM DIGITS;6;
mapkey p7 #MODIFY;#NUM DIGITS;7;
mapkey p8 #MODIFY;#NUM DIGITS;8;
mapkey p9 #MODIFY;#NUM DIGITS;9;
mapkey ! @MAPKEY_LABELsheet1;~ Select `main_dlg_cur` `MenuBar1`1 `View`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `View.psh_view_goto_sheet`;\
mapkey(continued) ~ Input `gotosheet` `InpPagenum` `1`;~ Update `gotosheet` `InpPagenum`
`1`;\
mapkey(continued) ~ FocusOut `gotosheet` `InpPagenum`;~ Activate `gotosheet` `Goto`;\
mapkey(continued) ~ Activate `gotosheet` `Close`;
mapkey @ @MAPKEY_LABELsheet2;~ Select `main_dlg_cur` `MenuBar1`1 `View`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `View.psh_view_goto_sheet`;\
mapkey(continued) ~ Input `gotosheet` `InpPagenum` `2`;~ Update `gotosheet` `InpPagenum`
`2`;\
mapkey(continued) ~ FocusOut `gotosheet` `InpPagenum`;~ Activate `gotosheet` `Goto`;\
mapkey(continued) ~ Activate `gotosheet` `Close`;
mapkey # @MAPKEY_LABELsheet3;~ Select `main_dlg_cur` `MenuBar1`1 `Insert`;\
mapkey(continued) ~ Select `main_dlg_cur` `Insert.cb_dwg_dim`;\
mapkey(continued) ~ Close `main_dlg_cur` `Insert.cb_dwg_dim`;\
mapkey(continued) ~ Select `main_dlg_cur` `Insert.cb_dwg_ref_dim`;\
mapkey(continued) ~ Close `main_dlg_cur` `Insert.cb_dwg_ref_dim`;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `View`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `View.psh_view_goto_sheet`;\
mapkey(continued) ~ Input `gotosheet` `InpPagenum` `3`;~ Update `gotosheet` `InpPagenum`
`3`;\
mapkey(continued) ~ FocusOut `gotosheet` `InpPagenum`;~ Activate `gotosheet` `Goto`;\
mapkey(continued) ~ Activate `gotosheet` `Close`;
mapkey $ @MAPKEY_LABELsheet4;~ Select `main_dlg_cur` `MenuBar1`1 `Insert`;\
mapkey(continued) ~ Select `main_dlg_cur` `Insert.cb_dwg_dim`;\
mapkey(continued) ~ Close `main_dlg_cur` `Insert.cb_dwg_dim`;\
mapkey(continued) ~ Select `main_dlg_cur` `Insert.cb_dwg_ref_dim`;\
mapkey(continued) ~ Close `main_dlg_cur` `Insert.cb_dwg_ref_dim`;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `View`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `View.psh_view_goto_sheet`;\
mapkey(continued) ~ Input `gotosheet` `InpPagenum` `4`;~ Update `gotosheet` `InpPagenum`
`4`;\
mapkey(continued) ~ FocusOut `gotosheet` `InpPagenum`;~ Activate `gotosheet` `Goto`;\
mapkey(continued) ~ Activate `gotosheet` `Close`;
mapkey % @MAPKEY_LABELsheet5;~ Select `main_dlg_cur` `MenuBar1`1 `View`;\
mapkey(continued) ~ Select `main_dlg_cur` `View.OrientationCascadeBtn`;\
mapkey(continued) ~ Close `main_dlg_cur` `View.OrientationCascadeBtn`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `View.psh_view_goto_sheet`;\
mapkey(continued) ~ Input `gotosheet` `InpPagenum` `5`;~ Update `gotosheet` `InpPagenum`
`5`;\
mapkey(continued) ~ FocusOut `gotosheet` `InpPagenum`;~ Activate `gotosheet` `Goto`;\
mapkey(continued) ~ Activate `gotosheet` `Close`;
mapkey ^ @MAPKEY_LABELsheet6;~ Select `main_dlg_cur` `MenuBar1`1 `View`;\
mapkey(continued) ~ Select `main_dlg_cur` `View.OrientationCascadeBtn`;\
mapkey(continued) ~ Close `main_dlg_cur` `View.OrientationCascadeBtn`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `View.psh_view_goto_sheet`;\
mapkey(continued) ~ Input `gotosheet` `InpPagenum` `6`;~ Update `gotosheet` `InpPagenum`
`6`;\
mapkey(continued) ~ FocusOut `gotosheet` `InpPagenum`;~ Activate `gotosheet` `Goto`;\
mapkey(continued) ~ Activate `gotosheet` `Close`;
mapkey pj @MAPKEY_LABELprint JPEG;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `File`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `File.psh_save_as`;\
mapkey(continued) ~ Open `file_saveas` `type_option`;~ Close `file_saveas` `type_option`;\
mapkey(continued) ~ Select `file_saveas` `type_option`1 `db_566`;\
mapkey(continued) ~ Activate `file_saveas` `OK`;~ FocusIn `UI Message Dialog`
`ok`;\
mapkey(continued) ~ Activate `UI Message Dialog` `ok`;~ Open `shd_img_param` `o_dpi`;\
mapkey(continued) ~ Close `shd_img_param` `o_dpi`;~ Select `shd_img_param`
`o_dpi`1 `dpi300`;\
mapkey(continued) ~ Activate `shd_img_param` `OK`;
mapkey p1 @MAPKEY_LABELprecision = 1;#MODIFY;#NUM DIGITS;1;
mapkey ff @MAPKEY_LABELfeature filter;\
mapkey(continued) ~ Open `main_dlg_cur` `Sst_bar.filter_list`;\
mapkey(continued) ~ Close `main_dlg_cur` `Sst_bar.filter_list`;\
mapkey(continued) ~ Select `main_dlg_cur` `Sst_bar.filter_list`1 `1`;
mapkey fg @MAPKEY_LABELfilter geometry;\
mapkey(continued) ~ Open `main_dlg_cur` `Sst_bar.filter_list`;\
mapkey(continued) ~ Close `main_dlg_cur` `Sst_bar.filter_list`;\
mapkey(continued) ~ Select `main_dlg_cur` `Sst_bar.filter_list`1 `2`;
mapkey fs @MAPKEY_LABELfilter smart;\
mapkey(continued) ~ Open `main_dlg_cur` `Sst_bar.filter_list`;\
mapkey(continued) ~ Close `main_dlg_cur` `Sst_bar.filter_list`;\
mapkey(continued) ~ Select `main_dlg_cur` `Sst_bar.filter_list`1 `0`;
mapkey y @MAPKEY_LABELlayers;~ Select `main_dlg_cur` `MenuBar1`1 `View`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `View.psh_view_lyrs`;
mapkey t @MAPKEY_LABELtree;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvModelTree.mdisp`0;
mapkey aa @MAPKEY_LABELactivate;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Windows`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `Windows.psh_win_activate`;
mapkey gg @MAPKEY_LABELregenerate;#REGENERATE;
mapkey $F5 @MAPKEY_LABELx-sections;#X-SECTION;
mapkey sp @MAPKEY_LABELspin center;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `View`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `View.psh_view_orient`;\
mapkey(continued) ~ Open `orient` `SetupOptions`;~ Close `orient` `SetupOptions`;\
mapkey(continued) ~ Select `orient` `SetupOptions`1 `setup`;
mapkey cx @MAPKEY_LABELcomposite exact;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdDatumCurve.datum`;#COMPOSITE;#DONE;#DONE;
mapkey bb @MAPKEY_LABELboundary blemd;#FEATURE;#CREATE;#SURFACE;#NEW;\
mapkey(continued) #ADVANCED;#DONE;#BOUNDARIES;#DONE;#DONE;
mapkey ln @MAPKEY_NAMELaunch Notepad;@MAPKEY_LABELnotepad launch;\
mapkey(continued) @SYSTEMc:\\nate_temp\\notepad.bat;
mapkey le @MAPKEY_NAMELaunch Excel;@MAPKEY_LABELexcel launch;\
mapkey(continued) @SYSTEMc:\\nate_temp\\excel.bat;
mapkey lo @MAPKEY_NAMELaunch Outllok;@MAPKEY_LABELOutlook launch;\
mapkey(continued) @SYSTEMc:\\nate_temp\\outlook.bat;
mapkey lc @MAPKEY_LABELCalculator;@SYSTEMc:\\nate_temp\\calc.bat;
mapkey nn @MAPKEY_LABELname;#SET UP;#NAME;
display_plane_tags yes
bell no
mapkey cm @MAPKEY_LABELcopy mittor;#FEATURE;#COPY;#MIRROR;#DEPENDENT;#DONE;
mapkey nn @MAPKEY_LABELrename;#SET UP;#NAME;
mdl_tree_cfg_file F:\ptc_wildfire2\tree.cfg
mapkey sr @MAPKEY_LABELsurf round;#DONE;#FEATURE;#CREATE;#SURFACE;#NEW;\
mapkey(continued) #FILLET;#DONE;#DONE;#DONE;
mapkey sn @MAPKEY_LABELsurface new;#FEATURE;#CREATE;#SURFACE;#NEW;#DONE;\
mapkey(continued) #DONE;
mapkey se @MAPKEY_LABELsurf extend;#DONE;#FEATURE;#CREATE;#SURFACE;#EXTEND;\
mapkey(continued) #SINGLE DST;#DONE;
mapkey ii @MAPKEY_LABELinsert;#FEATURE;#INSERT MODE;#ACTIVATE;
mapkey ik @MAPKEY_LABELinsert kill;#FEATURE;#INSERT MODE;#CANCEL;Yes;\
mapkey(continued) ~ Activate `main_dlg_cur` `main_dlg_cur`;
shrinkwrap_alert no
mapkey sm @MAPKEY_LABELsrf merge;#FEATURE;#CREATE;#SURFACE;#MERGE;\
mapkey(continued) ~ FocusIn `Odui_Dlg_00` `sel.selbut.parent_quilt#0`;\
mapkey(continued) ~ FocusOut `Odui_Dlg_00` `sel.selbut.parent_quilt#0`;
mapkey gr @MAPKEY_LABELgroup local;#FEATURE;#GROUP;#LOCAL GROUP;;
mapkey pc @MAPKEY_LABELproject curve;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdDatumCurve.datum`;#PROJECTED;#DONE;#SELECT;\
mapkey(continued) #DONE;
display_point_tags yes
new_parameter_ui yes
spin_center_display no
mapkey pd @MAPKEY_LABELPARAMETER DELETE;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Utilities`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `Utilities.psh_params`;\
mapkey(continued) ~ ColumnSelect `relation_dlg` `ParTable`1 `access`;\
mapkey(continued) ~ Activate `relation_dlg` `TBDelParam`;\
mapkey(continued) ~ Activate `relation_dlg` `TBDelParam`;\
mapkey(continued) ~ Activate `relation_dlg` `TBDelParam`;\
mapkey(continued) ~ Activate `relation_dlg` `TBDelParam`;\
mapkey(continued) ~ Activate `relation_dlg` `TBDelParam`;\
mapkey(continued) ~ Activate `relation_dlg` `TBDelParam`;\
mapkey(continued) ~ Activate `relation_dlg` `TBDelParam`;\
mapkey(continued) ~ Activate `relation_dlg` `TBDelParam`;\
mapkey(continued) ~ Activate `relation_dlg` `TBDelParam`;\
mapkey(continued) ~ Activate `relation_dlg` `TBDelParam`;\
mapkey(continued) ~ Activate `relation_dlg` `TBDelParam`;\
mapkey(continued) ~ Activate `relation_dlg` `TBDelParam`;\
mapkey(continued) ~ Activate `relation_dlg` `TBDelParam`;\
mapkey(continued) ~ Activate `relation_dlg` `TBDelParam`;\
mapkey(continued) ~ Activate `relation_dlg` `TBDelParam`;\
mapkey(continued) ~ Activate `relation_dlg` `TBDelParam`;\
mapkey(continued) ~ Activate `relation_dlg` `TBDelParam`;~ Activate `relation_dlg`
`PB_OK`;
sim_max_memory_usage 500
pro_note_dir c:\prodata
cadam_line_weights 2
pen1_line_weight 1
pen2_line_weight 1
pen3_line_weight 1
pen4_line_weight 1
mapkey y @MAPKEY_LABELlayers;~ Select `main_dlg_cur` `PHTLeft.ShowCB`;\
mapkey(continued) ~ Close `main_dlg_cur` `PHTLeft.ShowCB`;\
mapkey(continued) ~ Activate `main_dlg_cur` `LayerTreePB`1;
mapkey y @MAPKEY_LABELlayers;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewLyrs.view`1;
mapkey u @MAPKEY_LABELundo layers;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewLyrs.view`0;
mapkey t @MAPKEY_LABELtree;~ Activate `main_dlg_cur` `resizer_button_2`1;
mapkey rev1notes @MAPKEY_LABELAdds Rev1 Notes;#SET UP;#NOTES;#NEW;\
mapkey(continued) ~ FocusIn `note_3d` `inp_name`;~ Update `note_3d` `inp_name`
`REV_1_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` ``;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Number (T1, P1, A, etc.) in "Text"
Area, Select \
mapkey(continued) "OK," Then Select "Resume" to Continue;#NEW;~ FocusIn
`note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_1_DESC_N`;~ FocusOut
`note_3d` `inp_name`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Description in "Text" Area, Select
"OK," then \
mapkey(continued) Select "Resume" to Continue;#NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_1_REGION_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Drawing Zone where Revision is Shown in
"Text" area, \
mapkey(continued) (Example: 1E4\;\
mapkey(continued) \means Sheet1, Location E4), Select "OK," then Select "Resume"
to Continue;\
mapkey(continued) #NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_1_DATE_N`;~ FocusOut
`note_3d` `inp_name`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Activate `main_dlg_cur` `main_dlg_cur`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\ndesigner`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\n{1:J.
DOE}`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSERevise "DD MMM YYYY" and "Designer" Making the
Changes, Select \
mapkey(continued) "OK," then Select "Resume" to Finish;%rev1param;%shownotes;
mapkey rev2notes @MAPKEY_LABELAdds Rev2 Notes;#SET UP;#NOTES;#NEW;\
mapkey(continued) ~ FocusIn `note_3d` `inp_name`;~ Update `note_3d` `inp_name`
`REV_2_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` ``;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Number (T2, P2, B, etc.) in "Text"
Area, Select \
mapkey(continued) "OK," Then Select "Resume" to Continue;#NEW;~ FocusIn
`note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_2_DESC_N`;~ FocusOut
`note_3d` `inp_name`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Description in "Text" Area, Select
"OK," then \
mapkey(continued) Select "Resume" to Continue;#NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_2_REGION_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Drawing Zone where Revision is Shown in
"Text" area, \
mapkey(continued) (Example: 1E4\;\
mapkey(continued) \means Sheet1, Location E4), Select "OK," then Select "Resume"
to Continue;\
mapkey(continued) #NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_2_DATE_N`;~ FocusOut
`note_3d` `inp_name`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Activate `main_dlg_cur` `main_dlg_cur`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\ndesigner`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\n{1:J.
DOE}`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSERevise "DD MMM YYYY" and "Designer" Making the
Changes, Select \
mapkey(continued) "OK," then Select "Resume" to Finish;%rev2param;
mapkey rev3notes @MAPKEY_LABELAdds Rev3 Notes;#SET UP;#NOTES;#NEW;\
mapkey(continued) ~ FocusIn `note_3d` `inp_name`;~ Update `note_3d` `inp_name`
`REV_3_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` ``;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Number (T3, P3, C, etc.) in "Text"
Area, Select \
mapkey(continued) "OK," Then Select "Resume" to Continue;#NEW;~ FocusIn
`note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_3_DESC_N`;~ FocusOut
`note_3d` `inp_name`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Description in "Text" Area, Select
"OK," then \
mapkey(continued) Select "Resume" to Continue;#NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_3_REGION_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Drawing Zone where Revision is Shown in
"Text" area, \
mapkey(continued) (Example: 1E4\;\
mapkey(continued) \means Sheet1, Location E4), Select "OK," then Select "Resume"
to Continue;\
mapkey(continued) #NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_3_DATE_N`;~ FocusOut
`note_3d` `inp_name`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Activate `main_dlg_cur` `main_dlg_cur`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\ndesigner`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\n{1:J.
DOE}`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSERevise "DD MMM YYYY" and "Designer" Making the
Changes, Select \
mapkey(continued) "OK," then Select "Resume" to Finish;%rev3param;
mapkey rev4notes @MAPKEY_LABELAdds Rev4 Notes;#SET UP;#NOTES;#NEW;\
mapkey(continued) ~ FocusIn `note_3d` `inp_name`;~ Update `note_3d` `inp_name`
`REV_4_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` ``;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Number (T4, P4, D, etc.) in "Text"
Area, Select \
mapkey(continued) "OK," Then Select "Resume" to Continue;#NEW;~ FocusIn
`note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_4_DESC_N`;~ FocusOut
`note_3d` `inp_name`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Description in "Text" Area, Select
"OK," then \
mapkey(continued) Select "Resume" to Continue;#NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_4_REGION_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Drawing Zone where Revision is Shown in
"Text" area, \
mapkey(continued) (Example: 1E4\;\
mapkey(continued) \means Sheet1, Location E4), Select "OK," then Select "Resume"
to Continue;\
mapkey(continued) #NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_4_DATE_N`;~ FocusOut
`note_3d` `inp_name`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Activate `main_dlg_cur` `main_dlg_cur`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\ndesigner`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\n{1:J.
DOE}`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSERevise "DD MMM YYYY" and "Designer" Making the
Changes, Select \
mapkey(continued) "OK," then Select "Resume" to Finish;%rev4param;
mapkey rev5notes @MAPKEY_LABELAdds Rev5 Notes;#SET UP;#NOTES;#NEW;\
mapkey(continued) ~ FocusIn `note_3d` `inp_name`;~ Update `note_3d` `inp_name`
`REV_5_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` ``;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Number (T5, P5, E, etc.) in "Text"
Area, Select \
mapkey(continued) "OK," Then Select "Resume" to Continue;#NEW;~ FocusIn
`note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_5_DESC_N`;~ FocusOut
`note_3d` `inp_name`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Description in "Text" Area, Select
"OK," then \
mapkey(continued) Select "Resume" to Continue;#NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_5_REGION_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Drawing Zone where Revision is Shown in
"Text" area, \
mapkey(continued) (Example: 1E4\;\
mapkey(continued) \means Sheet1, Location E4), Select "OK," then Select "Resume"
to Continue;\
mapkey(continued) #NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_5_DATE_N`;~ FocusOut
`note_3d` `inp_name`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Activate `main_dlg_cur` `main_dlg_cur`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\ndesigner`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\n{1:J.
DOE}`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSERevise "DD MMM YYYY" and "Designer" Making the
Changes, Select \
mapkey(continued) "OK," then Select "Resume" to Finish;%rev5param;
mapkey rev6notes @MAPKEY_LABELAdds Rev6 Notes;#SET UP;#NOTES;#NEW;\
mapkey(continued) ~ FocusIn `note_3d` `inp_name`;~ Update `note_3d` `inp_name`
`REV_6_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` ``;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Number (T6, P6, F, etc.) in "Text"
Area, Select \
mapkey(continued) "OK," Then Select "Resume" to Continue;#NEW;~ FocusIn
`note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_6_DESC_N`;~ FocusOut
`note_3d` `inp_name`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Description in "Text" Area, Select
"OK," then \
mapkey(continued) Select "Resume" to Continue;#NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_6_REGION_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Drawing Zone where Revision is Shown in
"Text" area, \
mapkey(continued) (Example: 1E4\;\
mapkey(continued) \means Sheet1, Location E4), Select "OK," then Select "Resume"
to Continue;\
mapkey(continued) #NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_6_DATE_N`;~ FocusOut
`note_3d` `inp_name`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Activate `main_dlg_cur` `main_dlg_cur`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\ndesigner`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\n{1:J.
DOE}`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSERevise "DD MMM YYYY" and "Designer" Making the
Changes, Select \
mapkey(continued) "OK," then Select "Resume" to Finish;%rev6param;
mapkey rev7notes @MAPKEY_LABELAdds Rev7 Notes;#SET UP;#NOTES;#NEW;\
mapkey(continued) ~ FocusIn `note_3d` `inp_name`;~ Update `note_3d` `inp_name`
`REV_7_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` ``;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Number (T7, P7, G, etc.) in "Text"
Area, Select \
mapkey(continued) "OK," Then Select "Resume" to Continue;#NEW;~ FocusIn
`note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_7_DESC_N`;~ FocusOut
`note_3d` `inp_name`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Description in "Text" Area, Select
"OK," then \
mapkey(continued) Select "Resume" to Continue;#NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_7_REGION_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Drawing Zone where Revision is Shown in
"Text" area, \
mapkey(continued) (Example: 1E4\;\
mapkey(continued) \means Sheet1, Location E4), Select "OK," then Select "Resume"
to Continue;\
mapkey(continued) #NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_7_DATE_N`;~ FocusOut
`note_3d` `inp_name`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Activate `main_dlg_cur` `main_dlg_cur`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\ndesigner`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\n{1:J.
DOE}`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSERevise "DD MMM YYYY" and "Designer" Making the
Changes, Select \
mapkey(continued) "OK," then Select "Resume" to Finish;%rev7param;
mapkey rev8notes @MAPKEY_LABELAdds Rev8 Notes;#SET UP;#NOTES;#NEW;\
mapkey(continued) ~ FocusIn `note_3d` `inp_name`;~ Update `note_3d` `inp_name`
`REV_8_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` ``;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Number (T8, P8, H, etc.) in "Text"
Area, Select \
mapkey(continued) "OK," Then Select "Resume" to Continue;#NEW;~ FocusIn
`note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_8_DESC_N`;~ FocusOut
`note_3d` `inp_name`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Description in "Text" Area, Select
"OK," then \
mapkey(continued) Select "Resume" to Continue;#NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_8_REGION_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Drawing Zone where Revision is Shown in
"Text" area, \
mapkey(continued) (Example: 1E4\;\
mapkey(continued) \means Sheet1, Location E4), Select "OK," then Select "Resume"
to Continue;\
mapkey(continued) #NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_8_DATE_N`;~ FocusOut
`note_3d` `inp_name`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Activate `main_dlg_cur` `main_dlg_cur`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\ndesigner`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\n{1:J.
DOE}`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSERevise "DD MMM YYYY" and "Designer" Making the
Changes, Select \
mapkey(continued) "OK," then Select "Resume" to Finish;%rev8param;
mapkey rev9notes @MAPKEY_LABELAdds Rev9 Notes;#SET UP;#NOTES;#NEW;\
mapkey(continued) ~ FocusIn `note_3d` `inp_name`;~ Update `note_3d` `inp_name`
`REV_9_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` ``;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Number (T9, P9, I, etc.) in "Text"
Area, Select \
mapkey(continued) "OK," Then Select "Resume" to Continue;#NEW;~ FocusIn
`note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_9_DESC_N`;~ FocusOut
`note_3d` `inp_name`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Description in "Text" Area, Select
"OK," then \
mapkey(continued) Select "Resume" to Continue;#NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_9_REGION_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Drawing Zone where Revision is Shown in
"Text" area, \
mapkey(continued) (Example: 1E4\;\
mapkey(continued) \means Sheet1, Location E4), Select "OK," then Select "Resume"
to Continue;\
mapkey(continued) #NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_9_DATE_N`;~ FocusOut
`note_3d` `inp_name`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Activate `main_dlg_cur` `main_dlg_cur`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\ndesigner`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\n{1:J.
DOE}`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSERevise "DD MMM YYYY" and "Designer" Making the
Changes, Select \
mapkey(continued) "OK," then Select "Resume" to Finish;%rev9param;
mapkey rev10notes @MAPKEY_LABELAdds Rev10 Notes;#SET UP;#NOTES;#NEW;\
mapkey(continued) ~ FocusIn `note_3d` `inp_name`;~ Update `note_3d` `inp_name`
`REV_10_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` ``;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Number (T10, P10, J, etc.) in
"Text" Area, \
mapkey(continued) Select "OK," Then Select "Resume" to Continue;#NEW;\
mapkey(continued) ~ FocusIn `note_3d` `inp_name`;~ Update `note_3d` `inp_name`
`REV_10_DESC_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Description in "Text" Area, Select
"OK," then \
mapkey(continued) Select "Resume" to Continue;#NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_10_REGION_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Drawing Zone where Revision is Shown in
"Text" area, \
mapkey(continued) (Example: 1E4\;\
mapkey(continued) \means Sheet1, Location E4), Select "OK," then Select "Resume"
to Continue;\
mapkey(continued) #NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_10_DATE_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Activate `main_dlg_cur` `main_dlg_cur`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\ndesigner`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\n{1:J.
DOE}`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSERevise "DD MMM YYYY" and "Designer" Making the
Changes, Select \
mapkey(continued) "OK," then Select "Resume" to Finish;%rev10param;
mapkey shownotes @MAPKEY_LABELShows Notes in Model Tree;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `View`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Select `main_dlg_cur` `View.cb_view_mdltreesetup`;\
mapkey(continued) ~ Close `main_dlg_cur` `View.cb_view_mdltreesetup`;\
mapkey(continued) ~ Activate `main_dlg_cur` `Filter`;~ Activate `mdl_filter`
`note_btn`1 ;\
mapkey(continued) ~ Activate `mdl_filter` `ok_btn`;
mapkey rev1param @MAPKEY_LABELCreates Rev 1 Parameters;#SET UP;#PARAMETERS;\
mapkey(continued)
#CREATE;#CONFIRM;#NOTE;rev_1;0;#NOTE;rev_1_desc;1;#NOTE;rev_1_region;2;#NOTE;\
mapkey(continued) rev_1_date;3;#RELATIONS;#ADD;drawing_rev=rev_1;;#REGENERATE;
mapkey rev2param @MAPKEY_LABELCreates Rev 2 Parameters;#SET UP;#PARAMETERS;\
mapkey(continued)
#CREATE;#CONFIRM;#NOTE;rev_2;4;#NOTE;rev_2_desc;5;#NOTE;rev_2_region;6;#NOTE;\
mapkey(continued) rev_2_date;7;#RELATIONS;#ADD;drawing_rev=rev_2;;#REGENERATE;
mapkey rev3param @MAPKEY_LABELCreates Rev 3 Parameters;#SET UP;#PARAMETERS;\
mapkey(continued)
#CREATE;#CONFIRM;#NOTE;rev_3;8;#NOTE;rev_3_desc;9;#NOTE;rev_3_region;10;\
mapkey(continued) #NOTE;rev_3_date;11;#RELATIONS;#ADD;drawing_rev=rev_3;;#REGENERATE;
mapkey rev4param @MAPKEY_LABELCreates Rev 4 Parameters;#SET UP;#PARAMETERS;\
mapkey(continued)
#CREATE;#CONFIRM;#NOTE;rev_4;12;#NOTE;rev_4_desc;13;#NOTE;rev_4_region;14;\
mapkey(continued) #NOTE;rev_4_date;15;#RELATIONS;#ADD;drawing_rev=rev_4;;#REGENERATE;
mapkey rev5param @MAPKEY_LABELCreates Rev 5 Parameters;#SET UP;#PARAMETERS;\
mapkey(continued)
#CREATE;#CONFIRM;#NOTE;rev_5;16;#NOTE;rev_5_desc;17;#NOTE;rev_5_region;18;\
mapkey(continued) #NOTE;rev_5_date;19;#RELATIONS;#ADD;drawing_rev=rev_5;;#REGENERATE;
mapkey rev6param @MAPKEY_LABELCreates Rev 6 Parameters;#SET UP;#PARAMETERS;\
mapkey(continued)
#CREATE;#CONFIRM;#NOTE;rev_6;20;#NOTE;rev_6_desc;21;#NOTE;rev_6_region;22;\
mapkey(continued) #NOTE;rev_6_date;23;#RELATIONS;#ADD;drawing_rev=rev_6;;#REGENERATE;
mapkey rev7param @MAPKEY_LABELCreates Rev 7 Parameters;#SET UP;#PARAMETERS;\
mapkey(continued)
#CREATE;#CONFIRM;#NOTE;rev_7;24;#NOTE;rev_7_desc;25;#NOTE;rev_7_region;26;\
mapkey(continued) #NOTE;rev_7_date;27;#RELATIONS;#ADD;drawing_rev=rev_7;;#REGENERATE;
mapkey rev8param @MAPKEY_LABELCreates Rev 8 Parameters;#SET UP;#PARAMETERS;\
mapkey(continued)
#CREATE;#CONFIRM;#NOTE;rev_8;28;#NOTE;rev_8_desc;29;#NOTE;rev_8_region;30;\
mapkey(continued) #NOTE;rev_8_date;31;#RELATIONS;#ADD;drawing_rev=rev_8;;#REGENERATE;
mapkey rev9param @MAPKEY_LABELCreates Rev 9 Parameters;#SET UP;#PARAMETERS;\
mapkey(continued)
#CREATE;#CONFIRM;#NOTE;rev_9;32;#NOTE;rev_9_desc;33;#NOTE;rev_9_region;34;\
mapkey(continued) #NOTE;rev_9_date;35;#RELATIONS;#ADD;drawing_rev=rev_9;;#REGENERATE;
mapkey rev10param @MAPKEY_LABELCreates Rev 10 Parameters;#SET UP;#PARAMETERS;\
mapkey(continued)
#CREATE;#CONFIRM;#NOTE;rev_10;36;#NOTE;rev_10_desc;37;#NOTE;rev_10_region;38;\
mapkey(continued) #NOTE;rev_10_date;39;#RELATIONS;#ADD;drawing_rev=rev_10;;#REGENERATE;
mapkey modelparam @MAPKEY_LABELCreates Model Parameters;#SET UP;#PARAMETERS;\
mapkey(continued) #CREATE;#CONFIRM;#STRING;engineered_by;FLEXTRONICS
DESIGN;#STRING;\
mapkey(continued) DESIGNED_BY;<Designed_By>;#STRING;APPROVED_BY;<Approved_By>;#STRING;DRAWN_BY;\
mapkey(continued) <Drawn_By>;#STRING;CUSTOMER;<Customer>;#STRING;PROJECT_NAME;<Project_Name>;\
mapkey(continued) #STRING;PART_NUMBER;<Part_Number>;#STRING;CUST_PART_NUMBER;\
mapkey(continued) <Customer_Part_Number>;#STRING;DESCRIPTION_1;<Description_1>;#STRING;\
mapkey(continued)
DESCRIPTION_2;<Description_2>;#STRING;DESCRIPTION_3;<Description_3>;#STRING;\
mapkey(continued) PART_STATUS;DEVELOPMENT;#STRING;MATERIAL1;<Material1>;#STRING;MATERIAL2;\
mapkey(continued)
<Material2>;#STRING;FINISH1;<Finish1>;#STRING;FINISH2;<Finish2>;#STRING;\
mapkey(continued) FINISH3;<Finish3>;#STRING;PAINT;<Paint>;#STRING;COATING;<Coating>;#STRING;\
mapkey(continued)
COLOR1;<Color1>;#STRING;COLOR2;<Color2>;#STRING;COLOR3;<Color3>;#REAL NUMBER;\
mapkey(continued) VOLUME;;#STRING;PART_REV;<Part_Rev>;#STRING;DRAWING_REV;<drawing_rev>;
mapkey drawingrev @MAPKEY_LABELCreates Model Parameter Drawing Revision;\
mapkey(continued) #SET UP;#PARAMETERS;#CREATE;#CONFIRM;#STRING;DRAWING_REV;<drawing_rev>;\
mapkey(continued) #RELATIONS;#ADD;drawing_rev=rev_1;;#REGENERATE;
mapkey $F12 @MAPKEY_LABELNEW PARAM;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Utilities`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `Utilities.psh_util_pref`;\
mapkey(continued) ~ FocusOut `preferences` `InputOpt`;\
mapkey(continued) ~ Select `preferences` `AssyTree`1 `node0:new_parameter_ui :
no : 3`;\
mapkey(continued) ~ Open `preferences` `EditPanel`;~ Close `preferences` `EditPanel`;\
mapkey(continued) ~ Select `preferences` `EditPanel`1 `yes *`;\
mapkey(continued) ~ Activate `preferences` `AddOpt`;~ FocusOut `preferences` `InputOpt`;\
mapkey(continued) ~ Activate `preferences` `ApplySave`;~ FocusOut `preferences`
`InputOpt`;\
mapkey(continued) ~ Activate `preferences` `Close`;
mapkey $F11 @MAPKEY_LABELOLD PARAM;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Utilities`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `Utilities.psh_util_pref`;\
mapkey(continued) ~ FocusOut `preferences` `InputOpt`;\
mapkey(continued) ~ Select `preferences` `AssyTree`1 `node0:new_parameter_ui :
yes : 3`;\
mapkey(continued) ~ Open `preferences` `EditPanel`;~ Close `preferences` `EditPanel`;\
mapkey(continued) ~ Select `preferences` `EditPanel`1 `no`;~ Activate
`preferences` `AddOpt`;\
mapkey(continued) ~ FocusOut `preferences` `InputOpt`;~ Activate `preferences` `ApplySave`;\
mapkey(continued) ~ FocusOut `preferences` `InputOpt`;~ Activate `preferences`
`Close`;
new_relation_ui yes
mapkey nm @MAPKEY_LABELnominal;\
mapkey(continued) ~ Timer `UI Desktop` `UI Desktop` `popupMenuRMBTimerCB`;\
mapkey(continued) ~ Close `rmb_popup` `PopupMenu`;\
mapkey(continued) ~ Activate `rmb_popup` `DwgPopupEditProperties`;\
mapkey(continued) ~ Open `mod_dim_asynch` `opt_tol_mode`;\
mapkey(continued) ~ Close `mod_dim_asynch` `opt_tol_mode`;\
mapkey(continued) ~ Select `mod_dim_asynch` `opt_tol_mode`1 `Nominal`;\
mapkey(continued) ~ Activate `mod_dim_asynch` `psh_ok`;
mapkey nm @MAPKEY_LABELnominal;\
mapkey(continued) ~ Timer `UI Desktop` `UI Desktop` `popupMenuRMBTimerCB`;\
mapkey(continued) ~ Close `rmb_popup` `PopupMenu`;\
mapkey(continued) ~ Activate `rmb_popup` `DwgPopupEditProperties`;\
mapkey(continued) ~ Open `mod_dim_asynch` `opt_tol_mode`;\
mapkey(continued) ~ Close `mod_dim_asynch` `opt_tol_mode`;\
mapkey(continued) ~ Select `mod_dim_asynch` `opt_tol_mode`1 `Nominal`;\
mapkey(continued) ~ Activate `mod_dim_asynch` `psh_ok`;
mapkey pl @MAPKEY_LABELPRELIMINARY;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Insert`;\
mapkey(continued) ~ Select `main_dlg_cur` `Insert.cb_dwg_sym`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;~ Close `main_dlg_cur` `Insert.cb_dwg_sym`;\
mapkey(continued) ~ Activate `main_dlg_cur` `psh_dwg_sym_custom`;\
mapkey(continued) ~ Activate `drawing_sym` `browse`;\
mapkey(continued) ~ Select `file_open` `Ph_list.Filelist`1 `preliminary.sym`;\
mapkey(continued) ~ Activate `file_open` `Open`;~ Activate `drawing_sym` `OK_push`;
mapkey sy @MAPKEY_LABELSYMBOL;~ Select `main_dlg_cur` `MenuBar1`1 `Insert`;\
mapkey(continued) ~ Select `main_dlg_cur` `Insert.cb_dwg_sym`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;~ Close `main_dlg_cur` `Insert.cb_dwg_sym`;\
mapkey(continued) ~ Activate `main_dlg_cur` `psh_dwg_sym_custom`;\
mapkey(continued) ~ Activate `drawing_sym` `browse`;
system_colors_file C:\prodata\syscol.scl
mapkey sm @MAPKEY_LABELsrf merge;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdFtMerge.b_feat`;\
mapkey(continued) ~ Activate `main_dlg_cur` `maindashInst0.Flip1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `maindashInst0.Flip2`;
fem_default_solver nastran
fem_which_ansys_solver frontal
pro_ansys_path F:\Program Files\Ansys Inc\v100\ANSYS\bin\intel\ANSYS.exe
mapkey wq ~ Activate `main_dlg_cur` `sim_weld_tlb.sim_ac`;\
mapkey(continued) ~ Open `sim_dlg_weld` `TypeOption`;~ Close `sim_dlg_weld` `TypeOption`;\
mapkey(continued) ~ Select `sim_dlg_weld` `TypeOption`1 `Perimeter Weld`;\
mapkey(continued) ~ Update `sim_dlg_weld` `ThickPH.ScalarInput` `3`;\
mapkey(continued) ~ Activate `sim_dlg_weld` `GeomPairPH.GeomPush`;
mapkey cg @MAPKEY_LABELcopy_geom point;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Insert`;\
mapkey(continued) ~ Select `main_dlg_cur` `Insert.cb_sharedata`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Close `main_dlg_cur` `Insert.cb_sharedata`;\
mapkey(continued) ~ Activate `main_dlg_cur` `pshDataShrCopyGeom`;\
mapkey(continued) ~ Select `Odui_Dlg_01` `odui_steps`1 `MISC REFS`;\
mapkey(continued) ~ Activate `Odui_Dlg_01` `odui_steps`1 `MISC REFS`;\
mapkey(continued) ~ Activate `gcpy_misc_refs` `CBDtmPoint`1;
mapkey pi @MAPKEY_LABELpipe;~ Select `main_dlg_cur` `MenuBar1`1 `Insert`;\
mapkey(continued) ~ Select `main_dlg_cur` `Insert.cb_advanced`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Close `main_dlg_cur` `Insert.cb_advanced`;\
mapkey(continued) ~ Activate `main_dlg_cur` `pshPipe`;#DONE;.75;.2;
search_path F:\Ptc\wf2\aes\pintle
search_path F:\Ptc\wf2\aes\RT120_JAN1806
mapkey nt @MAPKEY_LABELnote;~ Select `main_dlg_cur` `MenuBar1`1 `Insert`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `Insert.psh_dwg_note`;#MAKE NOTE;
mapkey bv @MAPKEY_LABELbv;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdRstCrvMerge.tbRstl`;
mapkey oo @MAPKEY_LABELdiameter;~ FocusIn `mod_dim_asynch` `txt_dim_text`;\
mapkey(continued) ~ FocusOut `mod_dim_asynch` `txt_dim_text`;\
mapkey(continued) ~ Activate `mod_dim_asynch` `psh_sym_palette`;\
mapkey(continued) ~ Activate `sympalette` `sp_110`;\
mapkey(continued) ~ Update `mod_dim_asynch` `txt_dim_text` `@D n `;\
mapkey(continued) ~ FocusOut `mod_dim_asynch` `txt_dim_text`;
mapkey cd @MAPKEY_LABELcoordinate distance;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Analysis`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `Analysis.psh_analysis_measure`;\
mapkey(continued) ~ Open `measure` `DistFromOptions`;~ Close `measure` `DistFromOptions`;\
mapkey(continued) ~ Select `measure` `DistFromOptions`1 `Csys`;\
mapkey(continued) ~ Open `measure` `DistToOptions`;~ Close `measure` `DistToOptions`;\
mapkey(continued) ~ Select `measure` `DistToOptions`1 `Point`;\
mapkey(continued) ~ Open `measure` `DistProjRefOptions`;~ Close `measure` `DistProjRefOptions`;\
mapkey(continued) ~ Select `measure` `DistProjRefOptions`1 `Csys`;\
mapkey(continued) ~ Activate `measure` `DistFromSelect`;